Anilo Quartz Stone Carpet
Daily production capacity of Anilo 500 tons
Anilo Youtube Channel
PREPARATION of MIXTURE:
Mixing the material is one of the most critical stages in the processing, and must be done with extreme care. When contents are not used fully, the mixing ratio will be incorrect and the end product will not be of an optimal quality. The only appropriate way of obtaining the right balance between components A and B, is by weighing each using sufficiently accurate scales. Then mix The quartz stone with A / B for 3 minutes until a homogeneous mixture is formed.
A successful application can be achieved with the correct surface preparation and the correct use of materials.
The surface must be free of non-stick materials, dust, oil, weak parts and the application surface must be dry.
After the application it must be protected for effects such as water en dust etc. for 4 hours.
Interior ANOX61-F-UV pore filling, outdoor ANOX61-E(A+B) polyurethane based, abrasion resistant TRANSPARENT TOP COAT is recommended.
ANOX61-F-UV is a single-component acrylate to seal pores in stone carpet, it has a liquid impermeability. After the curing is complete, a clear and transparent film layer is formed. If there is a floor heating, close it one day before the application of quartz stone carpets begins.
The coating on the surface of the polyurethane-based, quartz-transparent top coat which is resistant to abrasion has a high UV resistance
constantly resistant to water contact
It is a waterproofing coating with water-repellent and high-strength waterproofing in swimming pools , bathrooms and on wet surfaces.
Surface Preparation; Powder, oil, grease, paint and so on that will reduce the adherence on The quartz stone surface must be thoroughly cleaned before application from powder, oil, grease, paint and from all kinds of dirt.
Subscribe to my E-mail list
Don't miss the campaign and the opportunities ...